main image

972660

350W Bench Belt & Disc Sander 390mm

350W


£ 89.95 

  • Dual-position, multi-angle, 390 x 125mm table with mitre guide
  • Belt sander surface can be tilted 0 - 90°
  • Long-life induction motor with sealed bearings
  • 390mm length belt sander & 150mm dia sanding disc
  • Includes 80-grit belt, 80-grit sanding sheet, multi-angle table & mitre guide

Review this Product review Logo
3 out of 5 stars
11 review(s)

Product Specification

Finish Painted metal
No Load Speed 1450rpm
Product Weight 14.6kg
Disc Diameter 914mm
Max Working Time 30 minutes

Videos


Key Features

Bench-mounted combined belt sander and 150mm disc sander. Long-life induction motor with sealed bearings. Double dust extraction ports. Dual-position, multi-angle table with mitre guide. Belt sander tilt angle can be adjusted 0 - 90°. Dust-protected sealed switch and rubber-coated mounting feet. Suitable for general sanding of various materials including metal, wood and plastic. 915 x 100mm sanding belt with 390mm length belt surface. No load speed: 1450rpm (disc sander), 5 m/s (belt sander). Supplied with 80-grit belt, 80-grit hook-and-loop sanding sheet, multi-angle table and mitre guide.



Box Contents

  • 1 x Belt and Disc Sander

Customer Ratings

By: James oneill

2019-01-01T00:00:00

Its exactly what i was looking well worth the price would recomend this

By: Andre Stapelberg

2018-03-13T00:00:00

Very solid and enough power for DIY use.

By: Van Leiper

2017-08-02T00:00:00

A. dd to my previous review. The disc guard proved to be too flimsy it cracked in two places when fitting and the holes did not seem to be correct. To get the disc to run true was a major headache and it was impossible to fasten it securely with the guard in place. In the end I threw the guard in the bin. Again only minus stars

By: Van Leiper

2017-08-02T00:00:00

Who designed this junk? To change a belt. like a major overhaul requiring three sizes of screwdrivers and a 10mm spanner? My previous machine needed one Allen key and three minutes of my time, this one has taken me ten minutes without replacing the covers!!!! The switch unit is very conveniently placed on the left end where you have to reach around a spinning disc to operate it or have the belt spinning toward you and throwing muck in your face! I seriously hope it blows up soon so that I can throw it away in cold blood. Star rating? Minus six.

By: brian ewins

2017-03-08T00:00:00

simple pictorial assembly instructions are clear and easy to follow to get the machine up and running. The belt sander work/rest stop needed a bit of manual '' adjustment'' to get it straight and in line , apart from that a good, well made semi-pro machine.

By: Simon Chapman

2017-03-03T00:00:00

I was initially impressed by the product but during setup It became apparent that one of the plastic guards didn''t fit correctly at factory and had been re drilled to force it. This evidently cracked the part in two places. Not wanting to send the whole unit back for a small plastic part, I contacted Silverline through the website to request a part. More than a week later, no reply. Worse still I cant find any phone numbers to chase it up. Having used the machine for two minutes, a loud clunking noise was heard that physically made the machine jump once per rotation. Having investigated it, either the motor is misaligned for the whole cast iron chassis is bent. This is probably the root cause of why the plastic spark guard didn''t fit in the first place. Either way completely unusable. Its going back for a refund.

By: Owen Henwood

2017-03-01T00:00:00

Very good tool that is good for the finishing touches on the fabrication work of my projects. A low affordable price that makes it a very competitive machine.

By: Ian Holt

2017-02-13T00:00:00

I found the assembly instructions were not easy to follow. I am an engineer and following drawings is my business so it should have been easy. The fitting of the disc to the shaft is poor as the disc runs out of true because the bore is oversize and maybe not even at 90 deg to the face. In general the disc is a very poor fit. The remainder of the machine seems to be good.

By: nigel carf

2017-02-10T00:00:00

It does exactly what it says on the box. My only criticism is that the extraction connection is a bit awkward to fit in to a standard extraction flexible pipe.

By: John Howsego

2017-01-31T00:00:00

Not very good! Poor fitting parts, inaccurate table tilt / angle guide.
  • customer contacted

By: Walter Rinaldi-Butcher

2016-11-30T00:00:00

Very pleasing and efficient piece of equipment

3 Year Guarantee

This Silverline 350W Bench Belt & Disc Sander 390mm is guaranteed for a period of 30 days from date of purchase against a fault developing in either the materials or the workmanship during manufacture. You can register for your 3 Year guarantee by registering your product online. Any faulty goods will be repaired or replaced free of charge.

Related Products
  • 344944
  • 612519
  • 441563
  • 262212
  • 460793